504128 Bertazzoni Flame Spreader Small

Replacing the 504128 Bertazzoni Small Spreader

1. Use a screwdriver to loosen and remove the two screws at the base of the Bertazzoni Small Flame Spreader (504128).

2. With the two screws removed, pull the burner cap away from the control knobs and lift it off.

3. Set the old flame spreader aside.

4. Carefully place the new flame spreader onto the burner cap ensuring that the holes line up with the control knobs.

5. Secure the new flame spreader in place by replacing the two screws on the base.

6. Push the burner cap back onto the control knobs and ensure it is firmly in place.

7. Turn the stove on and test the new flame spreader's performance. If everything is working as expected, you have successfully replaced the Bertazzoni Small Flame Spreader (504128).

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.