415096 Bertazzoni Spark Plug 700mm with Wiring

Step 1: Shut off the power to the oven by turning off the breaker at the circuit panel.

Step 2: Unscrew the spark plug wire’s connection to the connector at the back of the oven.

Step 3: Unscrew the old spark plug using a 10mm socket wrench and lift it out from the oven's rear.

Step 4: Insert the new spark plug into the oven's rear and screw it in using the 10mm socket wrench.

Step 5: Connect the new spark plug wire’s connection to the connector at the back of the oven.

Step 6: Turn the power to the oven back on by turning on the breaker at the circuit panel.

Step 7: Test the new spark plug by turning on the oven and setting the heat for 10 minutes. If the spark plug is working well, there will be sparks emitted from the spark plug.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.