4010113 Bertazzoni Range Gas Valve Knob
Part #: BER 4010113
4010113 Bertazzoni Range Gas Valve Knob
Weight : 0.163800 lbs
Dimension : 3.543300 x 2.401500 x 2.677100
4010113 Bertazzoni Range Gas Valve Knob
Weight : 0.163800 lbs
Dimension : 3.543300 x 2.401500 x 2.677100
Write Your Own Review
Steps to Replace a 4010113 Bertazzoni Range Gas Valve Knob
1. Turn off the power to the range. Shut off the gas to the unit by turning the knob to the off position and closing the shutoff valve.
2. Open the oven door, then use a screwdriver to remove the two screws holding the knob in place from the underside of the knob.
3. Pull the knob and its components away from the range.
4. Remove the retaining clip from the stem of the old valve knob by sliding it up and off.
5. Take the new valve knob and attach the retaining clip to the stem. Slide it down until it clicks into place.
6. Reinstall the new valve knob onto the range, making sure the arrows on the knob line up with the valve position. Secure it in place by screwing it in from the underside of the knob.
7. Turn on the gas to the unit and restore power to the range. The new valve knob should be ready to use.
By following these simple steps, you will successfully replace a 4010113 Bertazzoni Range Gas Valve Knob.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the power to the range. Shut off the gas to the unit by turning the knob to the off position and closing the shutoff valve.
2. Open the oven door, then use a screwdriver to remove the two screws holding the knob in place from the underside of the knob.
3. Pull the knob and its components away from the range.
4. Remove the retaining clip from the stem of the old valve knob by sliding it up and off.
5. Take the new valve knob and attach the retaining clip to the stem. Slide it down until it clicks into place.
6. Reinstall the new valve knob onto the range, making sure the arrows on the knob line up with the valve position. Secure it in place by screwing it in from the underside of the knob.
7. Turn on the gas to the unit and restore power to the range. The new valve knob should be ready to use.
By following these simple steps, you will successfully replace a 4010113 Bertazzoni Range Gas Valve Knob.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible brands information is not available for this part.