306024 Bertazzoni Range Spark Plug Spring

Instructions on How to Replace the 306024 Bertazzoni Range Spark Plug Spring

1. Begin by unplugging your Bertazzoni range and turning off all power sources attached to it.

2. Use a screwdriver to remove the back panel of your range. Be careful not to damage any wiring or components in the process.

3. Locate the spark plug spring, which is typically located near the rear of the range.

4. Using needle-nose pliers, carefully remove the old spark plug spring. Make sure to save any pieces that come off with the old spring.

5. Install the new spark plug spring by inserting it into the same place as the previous one. Secure it in place with your needle-nose pliers.

6. Reattach the range’s back panel using the screwdriver.

7. Plug the range back in and turn on the power.

8. Test the range to make sure the spark plug spring is working properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.