Z-G24C01-071900 Avanti Wire Rack

Instructions for Replacing an Avanti Products Z-G24C01-071900 Wire Rack

1. Turn off the power to the refrigerator/freezer unit by unplugging it from the wall outlet.

2. Open the refrigerator/freezer door and remove all items from the wire rack.

3. Locate the screws that secure the wire rack to the inside frame of the refrigerator/freezer. There are usually four screws per shelf.

4. Unscrew the screws and carefully lift the wire rack out. Place it aside and ensure that no parts or pieces drop back into the unit.

5. Place the new wire rack in the slot where the old one was. Make sure that the tabs on the rear portion of the wire rack fit securely into the slots provided.

6. Secure the wire rack to the inside frame of the refrigerator/freezer with the screws.

7. Replace all items that were previously on the wire rack.

8. Plug the refrigerator/freezer back into the wall outlet, and switch the power back on.

9. Your Avanti Products Z-G24C01-071900 wire rack replacement is now complete.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.