TO62SL00065 Avanti Knob
Part #: AVP TO62SL00065
TO62SL00065 Avanti Knob
Weight : 0.000000 lbs
TO62SL00065 Avanti Knob
Weight : 0.000000 lbs
Write Your Own Review
Replacing the Avanti Products TO62SL00065 KNOB
DIY instructions for Replacing the Avanti Products TO62SL00065 KNOB
1. Start by turning off the power to the appliance where the knob needs to be replaced.
2. Unscrew the old knob from the shaft of the appliance. Squeeze the tabs located on the sides of the knob and unscrew it from the shaft.
3. Take the new knob and align it with the shaft. Make sure that the set screws line up properly with the shaft.
4. Secure the knob in place by using the supplied wrench to tighten the set screws.
5. Turn the power back on and make sure the knob is working correctly.
With these simple steps, you can easily replace the Avanti Products TO62SL00065 Knob without any hassle!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY instructions for Replacing the Avanti Products TO62SL00065 KNOB
1. Start by turning off the power to the appliance where the knob needs to be replaced.
2. Unscrew the old knob from the shaft of the appliance. Squeeze the tabs located on the sides of the knob and unscrew it from the shaft.
3. Take the new knob and align it with the shaft. Make sure that the set screws line up properly with the shaft.
4. Secure the knob in place by using the supplied wrench to tighten the set screws.
5. Turn the power back on and make sure the knob is working correctly.
With these simple steps, you can easily replace the Avanti Products TO62SL00065 Knob without any hassle!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
