L13000629 American Vulkan Lokring Refrigeration Brass Reducer 6/4 NRMS00
Part #: ALC L13000629
L13000629 American Vulkan Lokring Refrigeration Brass Reducer 6/4NRMS00
Weight : 0.003300 lbs
Dimension : 1.968500 x 0.669200 x 0.354300
L13000629 American Vulkan Lokring Refrigeration Brass Reducer 6/4NRMS00
Weight : 0.003300 lbs
Dimension : 1.968500 x 0.669200 x 0.354300
Write Your Own Review
DIY Instruction Guide for Replacing the Refrigeration Brass RDCR CPLG 6/4NRMS00
1. Gather all of the necessary Materials and Tools needed before starting – A new Refrigeration Brass RDCR CPLG 6/4NRMS00, adjustable wrench, cable cutters, and tape measure.
2. Shut off the power source to the unit. This could be a breaker switch or unplugging the unit from the wall outlet.
3. Remove the old Refrigeration Brass RDCR CPLG 6/4NRMS00 by loosening the connections with an adjustable wrench. Make sure to save the old coupling for disposal or recycling.
4. Measure the length of the old coupling so that you can find the best fit replacement.
5. Attach the new Refrigeration Brass RDCR CPLG 6/4NRMS00. Use cable cutters to trim the excess metal away from the coupling.
6. Connect the new coupling in place using the adjustable wrench.
7. Test the connection to ensure there is no air leakage.
8. Turn the power back on and test the unit to make sure it is working properly.
9. Dispose of the old coupling responsibly according to local regulations.
Congratulations! You have successfully replaced the Refrigeration Brass RDCR CPLG 6/4NRMS00.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather all of the necessary Materials and Tools needed before starting – A new Refrigeration Brass RDCR CPLG 6/4NRMS00, adjustable wrench, cable cutters, and tape measure.
2. Shut off the power source to the unit. This could be a breaker switch or unplugging the unit from the wall outlet.
3. Remove the old Refrigeration Brass RDCR CPLG 6/4NRMS00 by loosening the connections with an adjustable wrench. Make sure to save the old coupling for disposal or recycling.
4. Measure the length of the old coupling so that you can find the best fit replacement.
5. Attach the new Refrigeration Brass RDCR CPLG 6/4NRMS00. Use cable cutters to trim the excess metal away from the coupling.
6. Connect the new coupling in place using the adjustable wrench.
7. Test the connection to ensure there is no air leakage.
8. Turn the power back on and test the unit to make sure it is working properly.
9. Dispose of the old coupling responsibly according to local regulations.
Congratulations! You have successfully replaced the Refrigeration Brass RDCR CPLG 6/4NRMS00.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
