WP74009217 Whirlpool Control Board
Whirlpool WP74009217 CNTRL-ELEC. This top-of-the-line control board is designed to provide sophisticated quality, reliability, and performance for your range. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 3.2374 lbs
Dimension : 15.25 x 5.25 x 5.75
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP74009217 CNTRL-ELEC. This top-of-the-line control board is designed to provide sophisticated quality, reliability, and performance for your range. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 3.2374 lbs
Dimension : 15.25 x 5.25 x 5.75
Write Your Own Review
The following parts are replaced by this product
- 74008662
- 74009150
- 74008663
- 74009215
- 74009216
- 74009217
- 74009214
- 74009153
- 74008664
Step 1: Unplug the power cord from the wall outlet and turn off the circuit breaker for the electric range.
Step 2: Remove the top access panel from the range by unscrewing the screws from the back of the range.
Step 3: Remove the oven door and lift out the entire oven cavity.
Step 4: Locate the Whirlpool WP74009217 CNTRL-ELEC on the back of the oven cavity.
Step 5: Unscrew the mounting screws holding the control board in place.
Step 6: Unplug the wiring harnesses and then remove the control board.
Step 7: Install the new Whirlpool WP74009217 CNTRL-ELEC control board by reversing the steps you used to remove the old board.
Step 8: Securely fasten all screws, plugs, and wires.
Step 9: Replace the oven cavity and oven door.
Step 10: Put the top access panel back in place and secure it with the screws.
Step 11: Reconnect the power cord to the range and turn the circuit breaker on.
Step 12: Test the range to ensure the new Whirlpool WP74009217 CNTRL-ELEC works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the top access panel from the range by unscrewing the screws from the back of the range.
Step 3: Remove the oven door and lift out the entire oven cavity.
Step 4: Locate the Whirlpool WP74009217 CNTRL-ELEC on the back of the oven cavity.
Step 5: Unscrew the mounting screws holding the control board in place.
Step 6: Unplug the wiring harnesses and then remove the control board.
Step 7: Install the new Whirlpool WP74009217 CNTRL-ELEC control board by reversing the steps you used to remove the old board.
Step 8: Securely fasten all screws, plugs, and wires.
Step 9: Replace the oven cavity and oven door.
Step 10: Put the top access panel back in place and secure it with the screws.
Step 11: Reconnect the power cord to the range and turn the circuit breaker on.
Step 12: Test the range to ensure the new Whirlpool WP74009217 CNTRL-ELEC works properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
