WP22003834 Whirlpool Water Inlet Valve
This Top Load Washer Water Inlet Valve Assembly allows hot and cold water to fill in the washer. This assembly includes the hot and cold water valves with a built-in thermistor that monitors the water inlet temperature and relays the information back to the washer’s control board. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Recommended Item: Consider replacing the hot and cold Fill Hoses (item 8212487RP) at the same time as this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve Assembly
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve Assembly
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.8633 lbs
Dimension : 4.75 x 4.25 x 5.88
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Top Load Washer Water Inlet Valve Assembly allows hot and cold water to fill in the washer. This assembly includes the hot and cold water valves with a built-in thermistor that monitors the water inlet temperature and relays the information back to the washer’s control board. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Recommended Item: Consider replacing the hot and cold Fill Hoses (item 8212487RP) at the same time as this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve Assembly
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve Assembly
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.8633 lbs
Dimension : 4.75 x 4.25 x 5.88
Write Your Own Review
The following parts are replaced by this product
- 22003834
DIY Instructions on Replacing WP22003834 Whirlpool Water Valve
Tools Needed:
•Towel
•Wrench
•Screwdriver
•Pliers
•Replacement WP22003834 Whirlpool Water Valve
Instructions:
1. Shut off the water supply to the refrigerator by turning off the appropriate valves.
2. Place the towel beneath the refrigerator. This will help catch any water that spills during the repair.
3. Disconnect the cold water line from the old water valve using a wrench.
4. Unscrew the mounting screws holding the old valve in place with a screwdriver.
5. Carefully remove the old valve.
6. Install the new WP22003834 Whirlpool Water Valve and secure it with mounting screws.
7. Reconnect the cold water line to the new valve using pliers.
8. Turn on the water supply to the refrigerator.
9. Test the new WP22003834 Whirlpool Water Valve by turning on the water dispenser and checking for leaks.
Following these simple DIY instructions you should have now replaced your WP22003834 Whirlpool Water Valve successfully!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
•Towel
•Wrench
•Screwdriver
•Pliers
•Replacement WP22003834 Whirlpool Water Valve
Instructions:
1. Shut off the water supply to the refrigerator by turning off the appropriate valves.
2. Place the towel beneath the refrigerator. This will help catch any water that spills during the repair.
3. Disconnect the cold water line from the old water valve using a wrench.
4. Unscrew the mounting screws holding the old valve in place with a screwdriver.
5. Carefully remove the old valve.
6. Install the new WP22003834 Whirlpool Water Valve and secure it with mounting screws.
7. Reconnect the cold water line to the new valve using pliers.
8. Turn on the water supply to the refrigerator.
9. Test the new WP22003834 Whirlpool Water Valve by turning on the water dispenser and checking for leaks.
Following these simple DIY instructions you should have now replaced your WP22003834 Whirlpool Water Valve successfully!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
