W11573757 Whirlpool Cap Assembly

Replacing the Whirlpool W11573757 Capacitor

If your Whirlpool W11573757 capacitor has gone bad, it is important to replace it in order to ensure your appliance runs efficiently. Replacing the capacitor yourself is not a difficult task and can be done in a relatively short amount of time with the right tools. Follow these simple steps to replace the Whirlpool W11573757 capacitor quickly and safely.

Step 1: Disconnect Your Appliance

Before attempting any repairs on your appliance, always make sure to disconnect it from its power source. Not doing this can result in serious injury or even death.

Step 2: Locate Capacitor

Find the capacitor by tracing the wires leading from the motor. You will be able to identify it easily since it will be cylindrical in shape and usually held in place with two metal clips.

Step 3: Remove Old Capacitor

Using a pair of needle-nose pliers, carefully remove the metal clips and the old capacitor, taking care to note the orientation of the wires. Discard the old capacitor.

Step 4: Install New Capacitor

Take the new capacitor and connect the wires, following the same orientation as the old one. Secure it in place with the metal clips.

Step 5: Reconnect Power Source

Reattach the appliance to its power source and test it out. If it works correctly, your repair is complete.

Following these simple steps should allow you to easily and safely replace the Whirlpool W11573757 capacitor without needing to call in a professional.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.