W11545764 Whirlpool Float Switch
Whirlpool W11545764 Float Switch We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.452600 lbs
Dimension : 4.370000 x 4.251900 x 3.385800
Product Details
Reviews 1
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11545764 Float Switch We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.452600 lbs
Dimension : 4.370000 x 4.251900 x 3.385800
Write Your Own Review
The following parts are replaced by this product
- W11036170
- W11255994
Replacing the Whirlpool W11545764 FloAT Switch
1. Begin by turning off the power to the washing machine and unplugging it from the wall outlet.
2. Locate the Float Switch in the back of the washer that is connected to the motor. It should be a plastic coil with a lever on the end.
3. Remove the two screws that are holding the Float Switch in place.
4. Detach the wiring harness from the switch and then remove it from the machine.
5. Take the new Float Switch and attach the wiring harness to it.
6. Secure the Float Switch in place and fasten the two screws that previously held it.
7. Plug the washer back into the wall outlet and turn the power back on.
8. Test the machine to make sure the new Float Switch is working properly.
By following these simple steps, you’ll be able to replace the Whirlpool W11545764 Float Switch quickly and easily. With these DIY instructions, you won’t need to hire a professional to replace your Float Switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Begin by turning off the power to the washing machine and unplugging it from the wall outlet.
2. Locate the Float Switch in the back of the washer that is connected to the motor. It should be a plastic coil with a lever on the end.
3. Remove the two screws that are holding the Float Switch in place.
4. Detach the wiring harness from the switch and then remove it from the machine.
5. Take the new Float Switch and attach the wiring harness to it.
6. Secure the Float Switch in place and fasten the two screws that previously held it.
7. Plug the washer back into the wall outlet and turn the power back on.
8. Test the machine to make sure the new Float Switch is working properly.
By following these simple steps, you’ll be able to replace the Whirlpool W11545764 Float Switch quickly and easily. With these DIY instructions, you won’t need to hire a professional to replace your Float Switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
