W11513248 Whirlpool Door Lock
Whirlpool W11513248 LATCH. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.9389 lbs
Dimension : 15 x 6.6141 x 2.7165
Whirlpool W11513248 LATCH. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.9389 lbs
Dimension : 15 x 6.6141 x 2.7165
Write Your Own Review
How to Replace the Whirlpool W11513248 LATCH
Replacing the latch on your Whirlpool W11513248 refrigerator is a relatively simple task and can be completed in a few easy steps. Here is what you'll need:
• New Whirlpool Latch (Part W11513248)
• Flathead Screwdriver
• Phillips Screwdriver
Step 1: Unplug the Refrigerator
Before beginning, make sure to unplug the fridge from the wall outlet.
Step 2: Remove the Control Panel
Using a Phillips screwdriver, remove the screws that are holding the top control panel in place. Once the screws have been removed, gently lift the panel up and off the refrigerator.
Step 3: Locate the Latch
The latch should be located at the top of the refrigerator door, near the hinges. Carefully remove the wires connected to the latch and then remove the screws that are holding it in place.
Step 4: Install the New Latch
Take the new latch and place it in the same spot as where the old one was located. Secure the latch with the screws and then re-attach the wires.
Step 5: Re-Install the Control Panel
Once the latch has been installed, place the control panel back in place and secure it using the screws.
You have now successfully replaced the Whirlpool W11513248 Latch!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the latch on your Whirlpool W11513248 refrigerator is a relatively simple task and can be completed in a few easy steps. Here is what you'll need:
• New Whirlpool Latch (Part W11513248)
• Flathead Screwdriver
• Phillips Screwdriver
Step 1: Unplug the Refrigerator
Before beginning, make sure to unplug the fridge from the wall outlet.
Step 2: Remove the Control Panel
Using a Phillips screwdriver, remove the screws that are holding the top control panel in place. Once the screws have been removed, gently lift the panel up and off the refrigerator.
Step 3: Locate the Latch
The latch should be located at the top of the refrigerator door, near the hinges. Carefully remove the wires connected to the latch and then remove the screws that are holding it in place.
Step 4: Install the New Latch
Take the new latch and place it in the same spot as where the old one was located. Secure the latch with the screws and then re-attach the wires.
Step 5: Re-Install the Control Panel
Once the latch has been installed, place the control panel back in place and secure it using the screws.
You have now successfully replaced the Whirlpool W11513248 Latch!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
