W11450223 Whirlpool Handle
Whirlpool W11450223 Handle We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.000000 lbs
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11450223 Handle We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.000000 lbs
Write Your Own Review
The following parts are replaced by this product
- W11244107
DIY Guide to Replacing a Whirlpool W11450223 Handle
Are you looking to replace the handle on your Whirlpool W11450223 refrigerator? If so, this DIY guide will walk you through the steps necessary to make the repair. Before embarking on this project, make sure that you have the correct tools and parts for the job.
Tools and Parts Needed:
1. Screwdriver
2. Replacement handle (Whirlpool part number W11450223)
3. Level or ruler
Instructions:
1. Disconnect the refrigerator from power by unplugging its power cord.
2. Open the refrigerator door, and locate the two screws holding the handle in place. Take out the screws with the screwdriver.
3. Remove the handle carefully. Depending on your model, you may need to gently lift the handle off the hinge pins or unscrew it before taking it off.
4. Take the new handle, and position it on the hinge pins. Make sure that it’s level with the refrigerator body.
5. Secure the handle by tightening the screws.
6. Re-connect the refrigerator to the power source.
Your Whirlpool W11450223 handle has now been replaced. If you had any difficulty following these steps, please contact an appliance repair specialist for further assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the handle on your Whirlpool W11450223 refrigerator? If so, this DIY guide will walk you through the steps necessary to make the repair. Before embarking on this project, make sure that you have the correct tools and parts for the job.
Tools and Parts Needed:
1. Screwdriver
2. Replacement handle (Whirlpool part number W11450223)
3. Level or ruler
Instructions:
1. Disconnect the refrigerator from power by unplugging its power cord.
2. Open the refrigerator door, and locate the two screws holding the handle in place. Take out the screws with the screwdriver.
3. Remove the handle carefully. Depending on your model, you may need to gently lift the handle off the hinge pins or unscrew it before taking it off.
4. Take the new handle, and position it on the hinge pins. Make sure that it’s level with the refrigerator body.
5. Secure the handle by tightening the screws.
6. Re-connect the refrigerator to the power source.
Your Whirlpool W11450223 handle has now been replaced. If you had any difficulty following these steps, please contact an appliance repair specialist for further assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
