W11368911 Whirlpool Control Board
This Whirlpool W11368911 HOUSING-UI We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.828 lbs
Dimension : 10.51 x 4.53 x 2.4
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Whirlpool W11368911 HOUSING-UI We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.828 lbs
Dimension : 10.51 x 4.53 x 2.4
Write Your Own Review
The following parts are replaced by this product
- W11028325
How to Replace the Whirlpool W11368911 HOUSING-UI
Replacing the Whirlpool W11368911 HOUSING-UI can be a daunting task, but it is not impossible. Follow this easy step-by-step guide and you’ll be on your way to replacing the interface for good.
Step 1: Unplug the appliance from the power source.
Before you begin any repair or maintenance, it is important to unplug the appliance from the power source. Doing this will ensure you are not at risk of electric shock or other hazards.
Step 2: Locate the HOUSING-UI.
Once the appliance has been unplugged, you can locate the HOUSING-UI. It is usually located behind the control console near the top of the appliance.
Step 3: Remove the screws securing the HOUSING-UI.
Once located, use a screwdriver to remove the screws that are securing the HOUSING-UI. Carefully remove the screws and set them aside in a safe place.
Step 4: Pull out the old HOUSING-UI.
Once the screws are removed, you can pull out the old HOUSING-UI. Be careful not to damage the appliance during this step.
Step 5: Install the new HOUSING-UI.
Now that you have removed the old HOUSING-UI, you can install the new one. Place the new HOUSING-UI into its designated slot, making sure it is securely installed.
Step 6: Re-secure the HOUSING-UI with screws.
Once the new HOUSING-UI is installed, you can re-secure it with the screws that were removed in Step 3. Tighten the screws securely until the HOUSING-UI is secure.
Step 7: Test the new HOUSING-UI.
Once the new HOUSING-UI is installed and secured with the screws, you can test it out. Plug the appliance back in to the power source and turn it on. Make sure the new HOUSING-UI is working correctly before you complete the task.
Now that you’ve successfully replaced the Whirlpool W11368911 HOUSING-UI, you can enjoy a working appliance!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool W11368911 HOUSING-UI can be a daunting task, but it is not impossible. Follow this easy step-by-step guide and you’ll be on your way to replacing the interface for good.
Step 1: Unplug the appliance from the power source.
Before you begin any repair or maintenance, it is important to unplug the appliance from the power source. Doing this will ensure you are not at risk of electric shock or other hazards.
Step 2: Locate the HOUSING-UI.
Once the appliance has been unplugged, you can locate the HOUSING-UI. It is usually located behind the control console near the top of the appliance.
Step 3: Remove the screws securing the HOUSING-UI.
Once located, use a screwdriver to remove the screws that are securing the HOUSING-UI. Carefully remove the screws and set them aside in a safe place.
Step 4: Pull out the old HOUSING-UI.
Once the screws are removed, you can pull out the old HOUSING-UI. Be careful not to damage the appliance during this step.
Step 5: Install the new HOUSING-UI.
Now that you have removed the old HOUSING-UI, you can install the new one. Place the new HOUSING-UI into its designated slot, making sure it is securely installed.
Step 6: Re-secure the HOUSING-UI with screws.
Once the new HOUSING-UI is installed, you can re-secure it with the screws that were removed in Step 3. Tighten the screws securely until the HOUSING-UI is secure.
Step 7: Test the new HOUSING-UI.
Once the new HOUSING-UI is installed and secured with the screws, you can test it out. Plug the appliance back in to the power source and turn it on. Make sure the new HOUSING-UI is working correctly before you complete the task.
Now that you’ve successfully replaced the Whirlpool W11368911 HOUSING-UI, you can enjoy a working appliance!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
