W11199160 Whirlpool Stand Mixer Power Cord
Power cord works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of stand mixers.
Weight : 0.007200 lbs
Dimension : 0.111000 x 0.111000 x 0.111000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Power cord works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of stand mixers.
Weight : 0.007200 lbs
Dimension : 0.111000 x 0.111000 x 0.111000
Write Your Own Review
The following parts are replaced by this product
- W10308001
Replacing the W11199160 Whirlpool Stand Mixer Power Cord
If your appliance has stopped working due to a faulty power cord, replacing it should be relatively simple with these easy-to-follow DIY instructions.
Before beginning any repair, make sure that your appliance is unplugged, and you have the appropriate replacement parts.
Step 1: Gather the necessary tools. To replace the power cord on a Whirlpool stand mixer, you will need a Phillips-Head screwdriver, a flat head screwdriver, and the new power cord.
Step 2: Locate the retaining screw at the top of the mixer. Using a screwdriver, unscrew the retaining screw and then lift off the top housing of the machine.
Step 3: Locate the existing power cord and remove it from the appliance. It is secured by two small clamps, which can be removed with a flat-head screwdriver.
Step 4: Feed the new power cord through the base of the appliance and into the upper housing. Secure it in place with the two small clamps.
Step 5: Replace the top housing of the appliance, and screw the retaining screw back into place.
Step 6: Plug the appliance in, and you’re done! Your appliance should now be functioning properly.
These simple steps should help you quickly and easily replace the W11199160 Whirlpool Stand Mixer Power Cord. If you have any further questions, please consult a professional.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your appliance has stopped working due to a faulty power cord, replacing it should be relatively simple with these easy-to-follow DIY instructions.
Before beginning any repair, make sure that your appliance is unplugged, and you have the appropriate replacement parts.
Step 1: Gather the necessary tools. To replace the power cord on a Whirlpool stand mixer, you will need a Phillips-Head screwdriver, a flat head screwdriver, and the new power cord.
Step 2: Locate the retaining screw at the top of the mixer. Using a screwdriver, unscrew the retaining screw and then lift off the top housing of the machine.
Step 3: Locate the existing power cord and remove it from the appliance. It is secured by two small clamps, which can be removed with a flat-head screwdriver.
Step 4: Feed the new power cord through the base of the appliance and into the upper housing. Secure it in place with the two small clamps.
Step 5: Replace the top housing of the appliance, and screw the retaining screw back into place.
Step 6: Plug the appliance in, and you’re done! Your appliance should now be functioning properly.
These simple steps should help you quickly and easily replace the W11199160 Whirlpool Stand Mixer Power Cord. If you have any further questions, please consult a professional.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
