W11033168 Whirlpool Refrigerator Evaporator Fan Motor Wire Harness
This Refrigerator Evaporator Fan Motor Wire Harness connects the motor to electrical circuits in the refrigerator. If your refrigerator will not start, is too warm, too cold, or making abnormal noises, you may need to replace this part. This motor includes the harness and thermisotor. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor Wire Harness
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor Wire Harness
• Tools Needed: Multi screwdriver
Weight : 0.4864 lbs
Dimension : 6.811 x 4.1338 x 2.4015
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Refrigerator Evaporator Fan Motor Wire Harness connects the motor to electrical circuits in the refrigerator. If your refrigerator will not start, is too warm, too cold, or making abnormal noises, you may need to replace this part. This motor includes the harness and thermisotor. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor Wire Harness
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Evaporator Fan Motor Wire Harness
• Tools Needed: Multi screwdriver
Weight : 0.4864 lbs
Dimension : 6.811 x 4.1338 x 2.4015
Write Your Own Review
The following parts are replaced by this product
- W10753788
- W10799425
Step-by-Step Guide to Replacing the Whirlpool Refrigerator Evaporator Fan Motor Wire Harness (W11033168)
1. Unplug your refrigerator from the wall and turn off the water supply. Then, remove the back cover of your refrigerator, so you can access the evaporator fan motor wires.
2. Disconnect the existing wire harness from the motor and its plugs. Make sure to pay attention to the colors and labels of the wires.
3. Inspect the old wire harness for any damage such as frayed, broken or corroded wires. Then, discard the old wire harness.
4. Take the new W11033168 Whirlpool Refrigerator Evaporator Fan Motor Wire Harness and carefully connect it to the motor and its plugs. Make sure to match each wire with the labels and colors on the old wire harness.
5. Once the new wire harness is connected, reattach the back cover of the refrigerator.
6. Plug the refrigerator back into the wall and turn the water supply back on.
7. Test the new wire harness by turning the fan motor on and make sure it works properly. If there are any issues, repeat steps 1-6.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your refrigerator from the wall and turn off the water supply. Then, remove the back cover of your refrigerator, so you can access the evaporator fan motor wires.
2. Disconnect the existing wire harness from the motor and its plugs. Make sure to pay attention to the colors and labels of the wires.
3. Inspect the old wire harness for any damage such as frayed, broken or corroded wires. Then, discard the old wire harness.
4. Take the new W11033168 Whirlpool Refrigerator Evaporator Fan Motor Wire Harness and carefully connect it to the motor and its plugs. Make sure to match each wire with the labels and colors on the old wire harness.
5. Once the new wire harness is connected, reattach the back cover of the refrigerator.
6. Plug the refrigerator back into the wall and turn the water supply back on.
7. Test the new wire harness by turning the fan motor on and make sure it works properly. If there are any issues, repeat steps 1-6.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
