W10910626 Whirlpool User Control and Display Board

DIY Instructions for Replacing Whirlpool W10910626 Panel-Cntl

Are you looking to replace the Whirlpool W10910626 Panel-Cntl? If so, this guide can help you get the job done quickly and correctly. With some basic tools and a few minutes of your time, you can replace the panel-cntl with ease.

Materials Needed:
- New Whirlpool W10910626 Panel-Cntl
- Phillips head screwdriver
- Flathead screwdriver

Instructions:
1. Before getting started, unplug the appliance and make sure the power is off.
2. Use a Phillips head screwdriver to remove all screws from the existing panel-cntl.
3. Once all screws are removed, use a flathead screwdriver to gently pry off the panel and remove it from the appliance.
4. Carefully place the new Whirlpool W10910626 Panel-Cntl in place and secure it with the screws you removed previously.
5. Test the panel-cntl for proper operation and then plug the appliance back in.

By following these instructions, you can easily replace your Whirlpool W10910626 Panel-Cntl. With this DIY guide, your appliance can be up and running in no time.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.