W10295130 Whirlpool Knob
W10295130 Whirlpool Knob
Weight : 0.000000 lbs
Dimension : 2.500000 x 1.750000 x 2.500000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
W10295130 Whirlpool Knob
Weight : 0.000000 lbs
Dimension : 2.500000 x 1.750000 x 2.500000
Write Your Own Review
The following parts are replaced by this product
- WPW10295130
Replacing the Whirlpool W10295130 KNOB - A Step-By-Step DIY Guide
Are you looking to replace the Whirlpool W10295130 knob on your washing machine? If so, you’ve come to the right place. With this simple DIY guide, you can easily and quickly replace your Whirlpool knob in no time. Here’s what you need to do:
1. Gather your supplies- Before you get started, make sure you have all the necessary supplies. You’ll need the new W10295130 knob, a Phillips screwdriver, a flathead screwdriver and needle-nose pliers.
2. Turn off the power- To avoid any risks of electric shock, make sure to turn off the power to your washing machine at the circuit breaker or AC outlet.
3. Remove the old knob- Start by using the Phillips screwdriver to remove the two screws that are holding the old knob in place. Once the screws are removed, grab the needle-nose pliers and gently pull the knob off of the shaft.
4. Install the new knob- Once the old knob is off, you can install the new one. Simply place the knob onto the shaft and use the flathead screwdriver to tighten the two screws. Make sure the screws are tight but not too tight, as this may damage the knob.
5. Turn the power back on- Finally, turn the power back on at the circuit breaker or AC outlet. Test out the knob to make sure it’s working properly.
And that’s it! With these simple five steps, you can easily replace your Whirlpool W10295130 knob in no time. Just make sure to follow the instructions carefully and take all the necessary safety precautions. Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the Whirlpool W10295130 knob on your washing machine? If so, you’ve come to the right place. With this simple DIY guide, you can easily and quickly replace your Whirlpool knob in no time. Here’s what you need to do:
1. Gather your supplies- Before you get started, make sure you have all the necessary supplies. You’ll need the new W10295130 knob, a Phillips screwdriver, a flathead screwdriver and needle-nose pliers.
2. Turn off the power- To avoid any risks of electric shock, make sure to turn off the power to your washing machine at the circuit breaker or AC outlet.
3. Remove the old knob- Start by using the Phillips screwdriver to remove the two screws that are holding the old knob in place. Once the screws are removed, grab the needle-nose pliers and gently pull the knob off of the shaft.
4. Install the new knob- Once the old knob is off, you can install the new one. Simply place the knob onto the shaft and use the flathead screwdriver to tighten the two screws. Make sure the screws are tight but not too tight, as this may damage the knob.
5. Turn the power back on- Finally, turn the power back on at the circuit breaker or AC outlet. Test out the knob to make sure it’s working properly.
And that’s it! With these simple five steps, you can easily replace your Whirlpool W10295130 knob in no time. Just make sure to follow the instructions carefully and take all the necessary safety precautions. Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
