297235200 Frigidaire Control Module

Step 1: Unplug or disconnect power to the refrigerator before servicing.

Step 2: To access the electrical control, remove the screws located at the rear of the frame that hold the frame in place.

Step 3: Once the screws are removed, carefully slide the frame out from the back of the fridge.

Step 4: Locate the electrical control panel on the side of the refrigerator and remove the screws that secure it into place.

Step 5: Carefully pull out the old electrical control to reveal the wiring connections.

Step 6: Disconnect the wiring from the old electrical control and discard the part.

Step 7: Attach new wiring to the new part, connect the new electrical control, and secure it into place.

Step 8: Reattach the frame to the back of the refrigerator, plug in the appliance, and turn it on to test the new electrical control.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.