Washer Parts

Washer spider and flange shaft assembly for some models of Samsung washing machines.

This is a genuine OEM item made by Samsung

Washer flange shaft fixer tub spider arm spinner support assembly for some models of Samsung washing machines.

The Top-Load Washer Shift Actuator is located at the bottom of the machine and shifts the washer from the agitate to the spin cycle. This part has a synchronous motor that shi ...fts the splutch cam ring and monitors the position of the splutch. If your appliance is unable to enter the spin cycle, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Shift Actuator• Tools Needed: Multi screwdriver Read More Read Less

HUDSON.

Clutch Assembly works with some models of Samsung Washers

Washer outer rear drum support flange shaft assembly for some models of Samsung clothes washing machines.

This is a genuine OEM part that works for some models of Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models.

This Front Load Washer Drum Baffle Kit includes 3 baffles and 3 screws. The baffles are installed on the inside of the washer drum, and tumble the clothes in the washer. If th ...e baffles are loose or damaged, they may need to be replaced. To access the part, remove the top panel of the washer. If your specific model has screws, be sure to remove them with a magnetic tip screwdriver so they don't get lost inside the machine. Replacing this part may require specialized tools, complicated disassembly of the appliance, and repair experience. Please remember to unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also be sure to shut off your hot and cold water supplies.Recommended parts: Screw (item #697027 ) and Single Drum baffle (item #1059587) from parts.com.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Drum Baffle Kit• Tools Needed: Specialized Tools Read More Read Less

The Front Load Dryer Tumbler Bearing Kit is in the front of the dryer and the dryer drum rides along it. The Bearing Kit helps the drum rotate smoothly and quietly. If your dr ...um is making uncommon noise during operation, replacing this part may alleviate the issue. This kit includes the bearing, a cork pad, glide, and two rivets. Note that dryers use two of these bearings in the front and both should be replaced at the same time. You'll remove the door and the front panel of your dryer to install this part. Installation of this part requires the use of a rivet gun. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Tumbler Bearing Kit• Tools Needed: Multi screwdriver, 5/16" nut driver, rivet gun Read More Read Less