Washer Parts

This Top Load Washer Leveling Leg Pad is a gray plastic part that allows your appliance to sit perfectly flat. Install the new leveling leg pad and test to see if you have it ...adjusted properly by putting the appliance on all four legs. Adjust the leveling leg in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Each pad is sold separately. Replacing this part will require basic hand tools, but no disassembly or repair experience. Check the other three leveling leg pads on your appliance in case they are also damaged or worn and require replacement. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Leveling Leg Pad Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Front Load Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. If your dryer won't start, won't produce heat, shuts off too soon ... or won't tumble, replacing the cut off fuse may alleviate these issues. The thermal cut off is located behind the dryer's lower access panel and attaches to the exhaust duct. Several wire terminals are included for installation depending on the part number you are replacing. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Thermal Cut Off Fuse• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Washer rear tub oil seal for some models of Samsung washing machines.

This Front Load Washer Drive Belt and Isolator Kit causes your washer to spin properly during the washing cycle. If your washer won't agitate, makes an unusual sound during op ...eration, or if there is a burning rubber smell during use, this kit may alleviate the issue. To access the part, you'll first need to remove the rear access panel of the washer. Includes instructions (1) belt (2) isolators. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. Remember to unplug the washing machine or shut off the house circuit breaker for the appliance before installing this item. Also be sure to turn off the hot and cold water supplies to your washer.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washing Machine Drive Belt and Isolator Kit• Tools Needed: Multi screwdriver, 1/2" wrench Read More Read Less