PA Categories

This SxS Refrigerator Water Inlet Valve supplies water to the ice maker and water dispenser in your refrigerator. This part is the secondary single water inlet valve and inclu ...des the valve, 1/4" tubing, and a plastic union. Safely store any food that could deteriorate while the power is off. Replacing the valve will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also, make sure to turn the water source to the refrigerator completely off before installing this part. Helpful Tip: The new part's wire connections are on the back of the unit and the valve includes a "push to lock" fitting that doesn't require a nut to attach the tubing. You'll have to remove the old style compression fittings around the water line and trim, then push the water line directly into the valve where it will lock into place.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Inlet Valve• Tools Needed: Multi screwdriver, 1/2" wrench Read More Read Less

The French Door Refrigerator Water Inlet Valve allows water to enter the refrigerator’s water dispenser and ice maker. If one of the solenoids in the original unit is bad, i ...t will prevent water from flowing into the ice maker and dispenser. If the icemaker of your appliance stops making ice, no water flows from the dispenser or it flows constantly, or if you notice water at the bottom of the fresh food compartment, the water inlet valve could be malfunctioning and need to be replaced. Installing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin. Helpful Tip: We do not recommend disassembling your appliance’s current water inlet valve to clean it due to the risk of failure after the repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) French Door Refrigerator Water Inlet Valve• Tools Needed: Flat-blade screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Ensure the safety and efficiency of your cooking appliance with the reliable gas safety valve, designed specifically for a range of popular brands including Electrolux, Frigid ...aire, and Kenmore. This essential component plays a critical role in regulating gas flow, providing peace of mind while cooking. The dual gas safety valve is engineered for compatibility with various oven models, making it a versatile choice for appliances from Crosley, Gibson, Kelvinator, Tappan, and Westinghouse. Constructed with high-quality materials, this valve promises durability and long-lasting performance. Easy to install, it’s a perfect solution for those looking to replace worn or malfunctioning parts in their oven. Optimize your kitchen’s functionality with this trusted replacement part, ensuring your cooking experience remains safe and efficient. Don't compromise on quality—choose a reliable option for your appliance repair needs. Read More Read Less

This Combination Washer Water Inlet Valve allows cold water to fill in the washer during the cleaning cycle. This part has a standard hose fitting inlet with (1) water outlet. ... If your washer isn’t getting any cold water, is filling slowly, not filling at all or leaking cold water onto the floor, replacing the valve may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Combination Washer Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and replacing it may alleviate these issues. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. In order to access the part, you'll remove the lower access panel from the dishwasher. Note that you will need to reuse the brass fitting from the existing part with the new valve; use pipe joint compound to securely attach it to the new part.Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply to your dishwasher before you begin. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help reduce limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance.*affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver, channel lock pliers Read More Read Less

Ensure the efficiency of your laundry routine with the washer dryer water inlet valve designed for a variety of GE appliances. This replacement component is essential for regu ...lating water flow, ensuring your washer operates smoothly without interruptions. Crafted specifically for compatibility with GE, Hotpoint, Haier, Monogram, and Café brands, this durable valve guarantees a perfect fit, making installation hassle-free. Engineered for reliability and long-lasting performance, this part replaces worn or malfunctioning valves, helping maintain optimal washing conditions. Whether updating an existing appliance or making necessary repairs, this quality valve is a vital part of your washer’s functionality. Trust this valve to restore your appliance to peak performance, allowing you to tackle laundry with confidence. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Ensure your dishwasher operates efficiently with the Bosch water inlet valve. Designed for compatibility with Bosch, Thermador, and Gaggenau appliances, this essential compone ...nt regulates water flow, preventing leaks and ensuring optimal cleaning performance. Constructed with high-quality materials, this part guarantees durability and reliability, making it a wise choice for maintaining your dishwasher’s functionality. Whether you're dealing with a faulty valve or conducting preventative maintenance, replacing this component can help extend the lifespan of your appliance. Easy to install, it’s a perfect fit for anyone looking to restore their dishwasher to peak condition. Trust in the quality of Bosch to keep your kitchen running smoothly. Maintain today to experience efficient water management in your dishwasher. Read More Read Less

Ensure your refrigerator operates at peak performance with this durable dual water valve designed specifically for select GE models. Crafted to deliver a consistent supply of ...water, this valve is compatible with a range of brands including Hotpoint, Haier, Monogram, and Café. With its reliable construction, it effectively regulates water flow, ensuring your ice maker and water dispenser function seamlessly. Replacing a faulty valve can improve efficiency and prevent leaks, enhancing the longevity of your appliance. This part is essential for maintaining optimal water filtration and functionality. Ideal for easy installation, it's a smart choice for both DIY enthusiasts and professional repairs. Maintain your refrigerator experience with this high-quality replacement part. Read More Read Less