80-54097-00 U-Line Thermostat

Step 1: Turn off the power to the refrigerator by unplugging it or turning off the circuit breaker that supplies power to the unit.

Step 2: Locate the thermostat in the back side of your refrigerator.

Step 3: Remove the screws that are holding the thermostat in place and slide out the thermostat.

Step 4: Carefully unscrew the wires from the terminals of the old thermostat and attach them to the new U-Line 80-54097-00 thermostat. Note: Black goes to “1”, Blue goes to “2”, and Red goes to “3”.

Step 5: Place the new thermostat into position and secure with the screws.

Step 6: Test the new thermostat. Plug the refrigerator back in and test the temperature setting. Adjust as necessary.

Step 7: Replace any insulation that may have came loose when the thermostat was removed.

Step 8: Enjoy your well deserved result!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.