807865 Speed Queen 30" Replacement Cavity

1. Before starting the replacement process, make sure that the power has been shut off from the outlet to avoid any incidents or injuries.

2. Pull out the Speed Queen 807865 CAVITY REPLMT 30" (DROP SHI) from its position.

3. Unscrew the bolts that are holding the cavity in place.

4. Carefully take out the old Cavity REPLMT and insert the new one.

5. Line up the new cavities with the old ones and firmly fasten them into place by using the screws you previously removed.

6. Make sure that all the connections are secure and tight.

7. Plug in the power back in and turn it on.

8. Observe the operation of the unit for few minutes. If it is working properly, you have successfully replaced the Speed Queen 807865 CAVITY REPLMT 30"(DROP SHI).

By following these steps, you can easy replace the Speed Queen 807865 CAVITY REPLMT 30"(DROP SHI) and be sure that it is secured perfectly in its place and is operating safely.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.