203885 Speed Queen Washer Top Load Pump and Bracket Assembly
203885 Speed Queen Washer Top Load Washer Pump & Bracket Assembly 120V 60H
Weight : 0.887000 lbs
Dimension : 6.456600 x 4.409400 x 4.330700
203885 Speed Queen Washer Top Load Washer Pump & Bracket Assembly 120V 60H
Weight : 0.887000 lbs
Dimension : 6.456600 x 4.409400 x 4.330700
Write Your Own Review
Replacing the 203885 Speed Queen Washer TLW Pump & Bracket Assembly, 120V 60HZ
Are you wondering how to replace the 203885 Speed Queen Washer TLW Pump & Bracket Assembly, 120V 60HZ? Follow these easy steps and you’ll be able to replace it yourself in no time.
1. Unplug the power cord from the wall outlet. Also make sure that there is no water supply to the washer.
2. Remove the clips connecting the front panel and the tub.
3. With the aid of a screwdriver, remove the screws that hold the pump bracket in place.
4. Take out the pump/motor assembly.
5. Unplug the leads connected to the existing pump/motor assembly.
6. Next, attach the wiring harness of the new pump/motor assembly with the matching terminals or connectors.
7. Now, place the new pump/motor assembly in the bracket and secure it with the screws.
8. Reconnect the front panel and the tub with the clips.
9. Plug the power cord back into the wall outlet and switch on the power.
10. Test the new pump/motor assembly whether it is functioning properly.
Now, you have successfully replaced the 203885 Speed Queen Washer TLW Pump & Bracket Assembly, 120V 60HZ!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you wondering how to replace the 203885 Speed Queen Washer TLW Pump & Bracket Assembly, 120V 60HZ? Follow these easy steps and you’ll be able to replace it yourself in no time.
1. Unplug the power cord from the wall outlet. Also make sure that there is no water supply to the washer.
2. Remove the clips connecting the front panel and the tub.
3. With the aid of a screwdriver, remove the screws that hold the pump bracket in place.
4. Take out the pump/motor assembly.
5. Unplug the leads connected to the existing pump/motor assembly.
6. Next, attach the wiring harness of the new pump/motor assembly with the matching terminals or connectors.
7. Now, place the new pump/motor assembly in the bracket and secure it with the screws.
8. Reconnect the front panel and the tub with the clips.
9. Plug the power cord back into the wall outlet and switch on the power.
10. Test the new pump/motor assembly whether it is functioning properly.
Now, you have successfully replaced the 203885 Speed Queen Washer TLW Pump & Bracket Assembly, 120V 60HZ!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
