203664 Speed Queen Lid Lock Wire Harness
203664 Speed Queen Wire Harness/Lid Lock
Weight : 0.064900 lbs
Dimension : 5.830000 x 2.440000 x 0.630000
203664 Speed Queen Wire Harness/Lid Lock
Weight : 0.064900 lbs
Dimension : 5.830000 x 2.440000 x 0.630000
Write Your Own Review
Replacing the Speed Queen 203664 HARN.LID LOCK
1. Unplug the washer and locate the HARN.LID LOCK. It is typically located on the right side of the control panel near the top.
2. Use a Phillips head screwdriver to remove the existing HARN.LID LOCK. Save all the screws for reassembly later.
3. Install the new HARN.LID LOCK. Secure with the saved screws.
4. Plug the washer back in and test the new HARN.LID LOCK to make sure it is working properly.
5. Enjoy your freshly replaced Speed Queen 203664 HARN.LID LOCK.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washer and locate the HARN.LID LOCK. It is typically located on the right side of the control panel near the top.
2. Use a Phillips head screwdriver to remove the existing HARN.LID LOCK. Save all the screws for reassembly later.
3. Install the new HARN.LID LOCK. Secure with the saved screws.
4. Plug the washer back in and test the new HARN.LID LOCK to make sure it is working properly.
5. Enjoy your freshly replaced Speed Queen 203664 HARN.LID LOCK.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
