DE94-02933A Samsung Microwave Oven Door Handle Assembly
Door handle assembly for some models of Samsung microwaves.
Weight : 0.3479 lbs
Dimension : 12.91 x 2.01 x 1.85
Door handle assembly for some models of Samsung microwaves.
Weight : 0.3479 lbs
Dimension : 12.91 x 2.01 x 1.85
Write Your Own Review
Replacing the DE94-02933A Samsung Microwave Oven Door Handle Assembly
DIY Instructions
1. Start by unplugging your Samsung microwave oven from the wall outlet.
2. Remove the inside panel of the microwave oven door by unscrewing the four screws at the corners of the door.
3. Once you have removed the screws, carefully pull the inside panel away from the microwave door.
4. Use a wrench to loosen and remove the screws that are holding the handle in place.
5. In order to remove the handle, press the tabs on the left and right sides of the handle and lift it out.
6. Insert the new DE94-02933A handle into the slot on the side of the microwave door and press the tabs into place.
7. Once the handle is securely in place, use the screws to reattach the handle. Tighten the screws until secure.
8. Place the inside panel back onto the microwave door and use the screws to reattach it.
9. Finally, plug your Samsung microwave oven back into the wall outlet and enjoy the newly replaced handle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Start by unplugging your Samsung microwave oven from the wall outlet.
2. Remove the inside panel of the microwave oven door by unscrewing the four screws at the corners of the door.
3. Once you have removed the screws, carefully pull the inside panel away from the microwave door.
4. Use a wrench to loosen and remove the screws that are holding the handle in place.
5. In order to remove the handle, press the tabs on the left and right sides of the handle and lift it out.
6. Insert the new DE94-02933A handle into the slot on the side of the microwave door and press the tabs into place.
7. Once the handle is securely in place, use the screws to reattach the handle. Tighten the screws until secure.
8. Place the inside panel back onto the microwave door and use the screws to reattach it.
9. Finally, plug your Samsung microwave oven back into the wall outlet and enjoy the newly replaced handle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
