DE81-09140A Samsung Micro Switch Assembly

Step 1: Unplug the power cord from the Samsung DE81-09140A SVC-MICRO SWITCH A.

Step 2: Open the control panel by removing the screws located at the bottom of the unit.

Step 3: Identify the switch on the circuit board. It's typically labeled as SVC-Micro Switch A.

Step 4: Carefully remove the switch from the board. Make sure to note how the switch is connected in order to re-connect it later.

Step 5: Look for any signs of damage or discoloration on the old switch, and remove it.

Step 6: Take the new switch and place it in the same position that the old switch was placed. Make sure to firmly press the switch into place and re-connect it with the appropriate wiring.

Step 7: Put the back cover of the unit in place, and secure it with the screws.

Step 8: Plug the power cord back into the unit and turn it on.

Step 9: Check if the switch is working properly. If it is not, repeat the procedure or contact a professional repair service.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.