DE81-09037A Samsung Lamp Dimmer Ehd

Replacing the Samsung DE81-09037A SVC-EHD LAMP DIMMER

1. Gather necessary tools – You will need a philips screwdriver, needle-nose pliers, and a new dimmer switch.

2. Unplug the power cord – Before beginning to replace the dimmer switch, always unplug the appliance from the wall outlet.

3. Remove the old dimmer switch – Use the philips screwdriver to remove the screws that are holding the old dimmer switch in place.

4. Identify wire terminals – It is important to identify which terminals are for hot (black/red) and neutral (white/green) wires.

5. Remove existing wires – Once the terminal labels have been identified, use needle-nose pliers to carefully remove the existing wires from the old dimmer switch.

6. Attach new wires -Attach the hot (black/red) and neutral (white/green) wires to the appropriately labeled terminals on the new dimmer switch.

7. Secure the new dimmer switch – Use the philips screwdriver to secure the new dimmer switch in place.

8. Plug in the power cord– After securing the new dimmer switch, plug the power cord back into the wall outlet and test the appliance.

By following these simple steps, you can easily replace your Samsung DE81-09037A SVC-EHD LAMP DIMMER. Make sure to follow all safety precautions while working with electricity.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.