DE81-08744A Samsung O-Ring D Burner

1. Start by unplugging the Samsung DE81-08744A SVC-O-RING D BURNER from the power source.
Remove all screws and panels of the appliance to expose the burner.

2. Remove the burner by lifting it up gently and setting it away from the unit. Disconnect the wiring from the burner and set it to the side for safekeeping.

3. Take a new Samsung DE81-08744A SVC-O-RING D BURNER and place it in the designated spot in the appliance. Make sure that the burner sits securely in the recess.

4. Attach the wiring to the burner. Make sure the connections are tight and secure.

5. Replace all screws, panels, and covers as necessary to ensure complete coverage.

6. Plug the Samsung DE81-08744A SVC-O-RING D BURNER back into the power source, and turn on the appliance to test the burner's performance.

7. If the burner functions correctly, the replacing process is complete; if not, go through the steps again to make sure everything is secured correctly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.