DE81-08324A Samsung Service Kit Led
Part #: SMG DE81-08324A
Dacor Oven Range Cooktop BURNER INDICATOR LIGHT 100950
Weight : 0.066 lbs
Dimension : 3.7795 x 3.4251 x 0.7086
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Dacor Oven Range Cooktop BURNER INDICATOR LIGHT 100950
Weight : 0.066 lbs
Dimension : 3.7795 x 3.4251 x 0.7086
Write Your Own Review
The following parts are replaced by this product
- 66957
- 76002
- 100950
1. Before starting the repair, power down and unplug the Samsung DE81-08324A SVC-SERVICE KIT LED TV to ensure safety.
2. Remove the back cover of the TV, using a screwdriver to access the internals of the TV.
3. Carefully locate and remove the defective or faulty parts, such as the controller boards, power supply, etc., if any.
4. Disconnect the cables connected to the defective part to be replaced.
5. Install the new part in place of the old one, making sure to secure all the cables in their original positions.
6. Replace the back cover of the TV and plug it in.
7. Turn on the TV and start testing the new part, ensuring that it is functioning properly.
8. After testing, replace any parts which may have been damaged during the repairs.
9. Reassemble the remaining components and securely tighten all screws.
10. Finally, check the entire repair to make sure there are no loose screws or other problems before running the TV.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the back cover of the TV, using a screwdriver to access the internals of the TV.
3. Carefully locate and remove the defective or faulty parts, such as the controller boards, power supply, etc., if any.
4. Disconnect the cables connected to the defective part to be replaced.
5. Install the new part in place of the old one, making sure to secure all the cables in their original positions.
6. Replace the back cover of the TV and plug it in.
7. Turn on the TV and start testing the new part, ensuring that it is functioning properly.
8. After testing, replace any parts which may have been damaged during the repairs.
9. Reassemble the remaining components and securely tighten all screws.
10. Finally, check the entire repair to make sure there are no loose screws or other problems before running the TV.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.