DE81-06939A Samsung Assembly Relay Board

Replacing the Samsung DE81-06939A SVC-ASSY RELAY BOARD

1. Start by unplugging the unit from the power source, and if necessary, unscrew the back panel of the device to access the board.

2. Once inside, locate the SVC-ASSY relay board and take note of which connections it has.

3. Disconnect any wires or cables connected to the board.

4. Remove the screws holding the board in place.

5. Take out the outdated board and replace it with the new Samsung DE81-06939A SVC-ASSY Relay Board.

6. Securely place the board in place and reconnect all the cables or wires that were previously attached.

7. Carefully check all connections and make sure they are properly connected.

8. Replace the back panel of the device and plug it into the power source.

9. Your Samsung DE81-06939A SVC-ASSY Relay Board replacement is now complete!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.