DE81-05738A Samsung Injector Holder Assembly

DIY Guide to Replacing the Samsung DE81-05738A SVC-ASSY INJECT HOLDER

Replacing your Samsung DE81-05738A SVC-ASSY INJECT HOLDER is a relatively simple process and can be completed in just a few steps. This guide will walk you through the process of replacing the inject holder in your Samsung model.

Tools you’ll need:
-Phillips screwdriver
-Flat head screwdriver

Step 1: Unplug the appliance from the wall outlet.

Step 2: Remove the top panel that is held in place with two screws. Set the panel aside.

Step 3: Look for the inject holder located inside the appliance and use the Phillips screwdriver to unscrew it from its place.

Step 4: Once the inject holder is removed, clean the area around it with a dry cloth to remove any dust or debris that may have collected.

Step 5: Take the new Samsung DE81-05738A inject holder and insert it into the appliance. Secure it in place by using the Phillips screwdriver.

Step 6: Put the top panel back in place and secure it with two screws.

Step 7: Plug the appliance back into the wall outlet and you're done!

Now you have successfully replaced the Samsung DE81-05738A SVC-ASSY INJECT HOLDER. Make sure to test the appliance and make sure that everything is in working order before using it again.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.