DE81-05385A Samsung Burner Head Assembly B

Replacing Your Samsung DE81-05385A SVC-BURNER HEAD B SINGLE

1. Unplug your Samsung range and allow it to cool completely before beginning any repair work.

2. Locate the screw at the front of the burner head assembly that holds it in place. Remove the screw with a Phillips head screwdriver.

3. Pull the burner head straight off the range. Make sure not to pull on the wiring beneath the burner head.

4. Grab the new Samsung DE81-05385A SVC-BURNER HEAD B SINGLE and push it into place where the old burner head was secured.

5. Secure the new burner head with the same Phillips head screw.

6. Push the wiring into place beneath the burner head and make sure all connections are secure.

7. Plug in your range and turn it on to test the new burner head. It should heat up quickly and evenly.

Congratulations, you’ve successfully replaced the Samsung DE81-05385A SVC-BURNER HEAD B SINGLE!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.