DE81-04702A Samsung Service Oven Control with Overlay

100% Guaranteed genuine parts logo
Part #: SMG DE81-04702A
100% Guaranteed genuine parts logo
DE81-04702A Samsung Service Oven Control with Overlay

Weight : 0.000000 lbs
Special Price $244.49 Regular Price $271.66 10% off
In stock
DE81-04702A Samsung Service Oven Control with Overlay

Weight : 0.000000 lbs
Write Your Own Review
You're reviewing:DE81-04702A Samsung Service Oven Control with Overlay
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. 701120
How to Replace the Samsung DE81-04702A SVC-OVEN CONTROL W/OVERLAY

If your Samsung oven is malfunctioning, it could be because of a faulty control panel. Replacing the DE81-04702A SVC-OVEN CONTROL W/OVERLAY can help solve the issue and get your oven working properly again. Follow this DIY guide to replace the Samsung DE81-04702A SVC-OVEN CONTROL W/OVERLAY.

Tools You Will Need:

- Phillips head screwdriver
- Flathead screwdriver
- Work gloves

Step 1: Unplug Your Oven

Unplug your oven from the wall outlet to ensure there is no power running through the appliance. This will help reduce the risk of electric shock or injury when replacing the part.

Step 2: Remove the Existing Panel

Locate the screws on the inside of the panel and remove them with a Phillips head screwdriver. Carefully set aside the screws so they can be reused. Once all of the screws are removed, the panel should be able to come off.

Step 3: Disconnect the Wiring

Disconnect the wires that are attached to the existing control panel. Start by gently pulling the plastic tab back on each one to release it. Make note of the colors and order of the wires. It might help to take a picture for reference.

Step 4: Install the New Panel

Once the wiring has been released, carefully remove the existing panel and set it aside. Take the new panel and install it with the screws. Gently reconnect the wires according to their original color and order.

Step 5: Secure the Wiring

Once you’ve connected the wiring, secure it in place with a flathead screwdriver. Make sure that all of the connections are snug and tight before moving on.

Step 6: Test It Out

After the panel has been reinstalled, plug the oven back into the wall outlet. Turn on the power and test out the oven to make sure it’s working properly. If the oven displays an error message, double check the connections and try again.

Congratulations, you’ve successfully replaced your Samsung DE81-04702A SVC-OVEN CONTROL W/OVERLAY. By following these steps, you’ll be able to get your oven running smoothly again.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with