DE81-03989A Samsung Harness Potentiometer 18

Installing the Samsung DE81-03989A SVC-HARNESS POTENTIOMETER
----------------------------------------------------------------

Are you looking to replace your Samsung DE81-03989A SVC-HARNESS POTENTIOMETER? This DIY tutorial will guide you through the step-by-step process of replacing it, so you can get back to using your appliance without worry.

What You’ll Need:
- Phillips screwdriver
- Samsung DE81-03989A SVC-HARNESS POTENTIOMETER replacement

Step 1: Unplug Appliance and Remove Back Panel
Before starting any DIY repair, make sure to unplug your appliance to avoid any safety risks. After doing so, locate and remove the back panel of the appliance. This may require a Phillips screwdriver if the panel is held in place with screws.

Step 2: Identify and Disconnect Potentiometer
Now that the back panel is removed, locate the Samsung DE81-03989A SVC-HARNESS POTENTIOMETER and disconnect it from the wires.

Step 3: Install New Potentiometer
Once the old potentiometer is disconnected, install the new Samsung DE81-03989A SVC-HARNESS POTENTIOMETER and then reconnect the wires as needed. Make sure to use all necessary caution when handling live electrical wiring.

Step 4: Reattach Back Panel
Once the new potentiometer is installed, replace the back panel of the appliance by securing it with screws.

And now your Samsung DE81-03989A SVC-HARNESS POTENTIOMETER has been replaced and your appliance should be good as new!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.