DE81-03511A Samsung LED Service Kit ER30 36

DIY Instructions for Replacing a Samsung DE81-03511A SVC-LED SERVICE KIT ER30 36 inch

1. Gather the necessary tools and materials: new Samsung DE81-03511A SVC-LED SERVICE KIT ER30 36 inch, Phillips head screwdriver, flat head screwdriver, needle nose pliers, voltage tester, antistatic wrist strap (optional).

2. Disconnect the power cord to the TV and unplug it from the wall outlet. Carefully remove the power cord and any other cables connected to the TV.

3. Put on the antistatic wrist strap (if you have one) to protect the components inside the TV from static electricity damage.

4. Flip the TV over and remove the screws on the back panel to open it up.

5. Carefully inspect the interior components to make sure they are not damaged or missing.

6. Locate the light source and its corresponding wiring. Unscrew the screws holding the light source in place and gently pull it out of the TV.

7. Connect the new Samsung DE81-03511A LED light source and its associated wiring. Make sure all the connections are secure.

8. Reassemble the back panel of the TV and replace the screws.

9. Connect the power cord and all other cables to the TV.

10. Plug the power cord into a wall outlet and power on the TV. Test the TV to make sure the new light source is operational.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.