DD82-01337B Samsung Dishwasher PCB Main Assembly
Samsung DD82-01337B OEM Diswasher Electronic Control Board. This electronic control board controls the washing, draining, and drying cycles of the dishwasher. Please check part compatability by model number before purchasing
Weight : 1.6641 lbs
Dimension : 13.7795 x 7.4803 x 2.244
Samsung DD82-01337B OEM Diswasher Electronic Control Board. This electronic control board controls the washing, draining, and drying cycles of the dishwasher. Please check part compatability by model number before purchasing
Weight : 1.6641 lbs
Dimension : 13.7795 x 7.4803 x 2.244
Write Your Own Review
Replacing the DD82-01337B Samsung Dishwasher PCB Main Assembly
1. Unplug the Samsung dishwasher from the power source to ensure safety.
2. Disable the water connected to the dishwasher as this may cause flooding.
3. Remove the screws located on the underside of the dishwasher door and then gently remove the inside panel of the dishwasher.
4. Find the control board, which is usually placed near the top right corner of the dishwasher’s interior.
5. Disconnect the wiring harness connect to the PCB main assembly.
6. Unscrew and remove the PCB main assembly from its mounting bracket.
7. Secure the new DD82-01337B Samsung dishwasher PCB main assembly in place and firmly attach the wiring harness back in.
8. Reinstall the door panel and reconnect the dishwasher to the power source.
9. Test the operation of the dishwasher to ensure proper functionality.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the Samsung dishwasher from the power source to ensure safety.
2. Disable the water connected to the dishwasher as this may cause flooding.
3. Remove the screws located on the underside of the dishwasher door and then gently remove the inside panel of the dishwasher.
4. Find the control board, which is usually placed near the top right corner of the dishwasher’s interior.
5. Disconnect the wiring harness connect to the PCB main assembly.
6. Unscrew and remove the PCB main assembly from its mounting bracket.
7. Secure the new DD82-01337B Samsung dishwasher PCB main assembly in place and firmly attach the wiring harness back in.
8. Reinstall the door panel and reconnect the dishwasher to the power source.
9. Test the operation of the dishwasher to ensure proper functionality.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
