DD81-02265A Samsung Dishwasher Water Inlet Valve ODM
Water Inlet Valve,ODM works with some models of Samsung Dishwashers
Weight : 0.3269 lbs
Dimension : 4.4881 x 3.622 x 2.7952
Water Inlet Valve,ODM works with some models of Samsung Dishwashers
Weight : 0.3269 lbs
Dimension : 4.4881 x 3.622 x 2.7952
Write Your Own Review
How to Replace a Samsung DD81-02265A Dishwasher Water Inlet Valve
Tools Needed:
-Phillips-head screwdriver
-½-inch wrench
-Flat-head screwdriver
Instructions:
1. Disconnect the power to your dishwasher by unplugging it or turning off the power at the breaker box.
2. Locate the water inlet valve on the bottom right side of the dishwasher, then remove the cover.
3. Use the Phillips-head screwdriver to remove the screws that secure the water inlet valve to the dishwasher’s wall, then use the ½-inch wrench to loosen the nut and remove the old water inlet valve.
4. Take the new DD81-02265A water inlet valve, and using the flat-head screwdriver, loosen the screw that secures the water line connector to the new valve.
5. Connect the new DD81-02265A water inlet valve to the dishwasher’s wall, and use the Phillips-head screwdriver to tighten the screws that secure it in place.
6. Reconnect the water line connector to the DD81-02265A valve and ensure that it’s secure.
7. Replace the cover on the water inlet valve, then turn the power back on at the breaker box or plug the dishwasher back in.
8. Test the new valve by running a cycle on the dishwasher.
Now that you’ve successfully replaced your Samsung DD81-02265A water inlet valve, your dishwasher should be functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
-Phillips-head screwdriver
-½-inch wrench
-Flat-head screwdriver
Instructions:
1. Disconnect the power to your dishwasher by unplugging it or turning off the power at the breaker box.
2. Locate the water inlet valve on the bottom right side of the dishwasher, then remove the cover.
3. Use the Phillips-head screwdriver to remove the screws that secure the water inlet valve to the dishwasher’s wall, then use the ½-inch wrench to loosen the nut and remove the old water inlet valve.
4. Take the new DD81-02265A water inlet valve, and using the flat-head screwdriver, loosen the screw that secures the water line connector to the new valve.
5. Connect the new DD81-02265A water inlet valve to the dishwasher’s wall, and use the Phillips-head screwdriver to tighten the screws that secure it in place.
6. Reconnect the water line connector to the DD81-02265A valve and ensure that it’s secure.
7. Replace the cover on the water inlet valve, then turn the power back on at the breaker box or plug the dishwasher back in.
8. Test the new valve by running a cycle on the dishwasher.
Now that you’ve successfully replaced your Samsung DD81-02265A water inlet valve, your dishwasher should be functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
