DC97-18247A Samsung Drawer Assembly
The Samsung DC97-18247A ASSY S.TUB BACK . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 151.721000 lbs
Dimension : 33.858300 x 33.661400 x 18.503900
The Samsung DC97-18247A ASSY S.TUB BACK . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 151.721000 lbs
Dimension : 33.858300 x 33.661400 x 18.503900
Write Your Own Review
Step 1: Shut off the power for your Samsung DC97-18247A ASSY S.TUB BACK. Disconnect from power source before proceeding with any repairs.
Step 2: Open up the access panel of your appliance. This will be located on the back or side of your Samsung DC97-18247A ASSY S.TUB BACK.
Step 3: Unscrew the screws and bolts which are securing the old assembly to the appliance.
Step 4: Pull the old assembly out and discard.
Step 5: Utilize your new replacement Samsung DC97-18247A ASSY S.TUB BACK and carefully line it up in the same place where the old one was removed.
Step 6: Secure the new assembly using the same screws and bolts you used to remove the old one. Make sure they are tightened, but not overly so.
Step 7: Test to make sure the new assembly is correctly installed and working properly.
Step 8: Once happy, close up the access panel.
Step 9: Double check your work and reconnect the appliance to its power source.
Congratulations! You have just replaced your Samsung DC97-18247A ASSY S.TUB BACK.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Open up the access panel of your appliance. This will be located on the back or side of your Samsung DC97-18247A ASSY S.TUB BACK.
Step 3: Unscrew the screws and bolts which are securing the old assembly to the appliance.
Step 4: Pull the old assembly out and discard.
Step 5: Utilize your new replacement Samsung DC97-18247A ASSY S.TUB BACK and carefully line it up in the same place where the old one was removed.
Step 6: Secure the new assembly using the same screws and bolts you used to remove the old one. Make sure they are tightened, but not overly so.
Step 7: Test to make sure the new assembly is correctly installed and working properly.
Step 8: Once happy, close up the access panel.
Step 9: Double check your work and reconnect the appliance to its power source.
Congratulations! You have just replaced your Samsung DC97-18247A ASSY S.TUB BACK.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
