DC96-01703G Samsung Washer Water Level Pressure Switch Sensor Assembly
Ensure your Samsung washer operates at peak efficiency with this high-quality water level pressure switch sensor assembly. Designed specifically for Samsung appliances, this durable component plays a crucial role in regulating water levels during your laundry cycles, ensuring optimal performance.
This switch is a direct replacement part, providing a seamless fit and easy installation, making it perfect for DIY repairs. By replacing your old or malfunctioning pressure switch, you can improve the reliability of your washer, reduce water waste, and Maintain your laundry experience.
Ideal for Samsung washer models, this part is an essential Maintain for maintaining your appliance. Invest in this reliable switch and enjoy peace of mind knowing that your laundry functions flawlessly.
Weight : 0.117700 lbs
Dimension : 2.990000 x 2.090000 x 2.600000
Ensure your Samsung washer operates at peak efficiency with this high-quality water level pressure switch sensor assembly. Designed specifically for Samsung appliances, this durable component plays a crucial role in regulating water levels during your laundry cycles, ensuring optimal performance.
This switch is a direct replacement part, providing a seamless fit and easy installation, making it perfect for DIY repairs. By replacing your old or malfunctioning pressure switch, you can improve the reliability of your washer, reduce water waste, and Maintain your laundry experience.
Ideal for Samsung washer models, this part is an essential Maintain for maintaining your appliance. Invest in this reliable switch and enjoy peace of mind knowing that your laundry functions flawlessly.
Weight : 0.117700 lbs
Dimension : 2.990000 x 2.090000 x 2.600000
Write Your Own Review
Replacing the DC96-01703G Samsung Washer Water Level Pressure Switch Sensor Assembly:
1. Unplug the washer from the power source.
2. Access the switch by removing the outer panel of the washer located on the back side.
3. Use a flathead screwdriver to loosen the screws that hold the pressure switch in place.
4. Carefully pull out the old pressure switch and remove the wires.
5. Disconnect the wire leads and set them aside.
6. Insert the new water level pressure switch sensor assembly and secure with the screws previously removed.
7. Reconnect the wire leads and make sure they are connected properly.
8. Replace the outer panel of the washer.
9. Plug in the washer and test it.
10. If everything is functioning properly, your new switch should be working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washer from the power source.
2. Access the switch by removing the outer panel of the washer located on the back side.
3. Use a flathead screwdriver to loosen the screws that hold the pressure switch in place.
4. Carefully pull out the old pressure switch and remove the wires.
5. Disconnect the wire leads and set them aside.
6. Insert the new water level pressure switch sensor assembly and secure with the screws previously removed.
7. Reconnect the wire leads and make sure they are connected properly.
8. Replace the outer panel of the washer.
9. Plug in the washer and test it.
10. If everything is functioning properly, your new switch should be working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
