DC69-00804A Samsung Washer Tub Packing Seal
Washer Packing Outer Tub Seal Gasket for some models of Samsung Washing Machines.
Weight : 0.1567 lbs
Dimension : 5.12 x 2.56 x 1.65
Washer Packing Outer Tub Seal Gasket for some models of Samsung Washing Machines.
Weight : 0.1567 lbs
Dimension : 5.12 x 2.56 x 1.65
Write Your Own Review
(1) Unplug the Samsung washing machine from the power outlet.
(2) Remove the rear access panel and locate the DC69-00804A packing seal.
(3) Using a flathead screwdriver, remove the old packing seal by unscrewing the screws that secure it in place.
(4) Remove the old seal and discard it.
(5) Clean the area where the new seal will be placed with a damp cloth or paper towel.
(6) Place the new DC69-00804A packing seal in the opening and use the screws to secure it.
(7) Reattach the rear access panel and plug the Samsung washer back into the power outlet.
(8) Test the new packing seal for proper installation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
(2) Remove the rear access panel and locate the DC69-00804A packing seal.
(3) Using a flathead screwdriver, remove the old packing seal by unscrewing the screws that secure it in place.
(4) Remove the old seal and discard it.
(5) Clean the area where the new seal will be placed with a damp cloth or paper towel.
(6) Place the new DC69-00804A packing seal in the opening and use the screws to secure it.
(7) Reattach the rear access panel and plug the Samsung washer back into the power outlet.
(8) Test the new packing seal for proper installation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
