DA97-05037D Samsung Refrigerator Ice Maker Support Assembly
Refrigerator ice maker support assembly for some models of Samsung fridges.
Weight : 3.025900 lbs
Dimension : 13.110200 x 6.220400 x 5.157400
Refrigerator ice maker support assembly for some models of Samsung fridges.
Weight : 3.025900 lbs
Dimension : 13.110200 x 6.220400 x 5.157400
Write Your Own Review
How to Replace the DA97-05037D Samsung Refrigerator Ice Maker Support Assembly
Replacing your Samsung refrigerator’s ice maker support assembly is a relatively simple process that can be done in a few steps. Follow this DIY guide to get your ice maker running again and enjoy icy cold drinks at home.
Materials Needed:
-Phillips head screwdriver
-DA97-05037D Samsung Refrigerator Ice Maker Support Assembly
Step 1: Unplug the Samsung fridge from power source. Of course, safety first!
Step 2: Locate the ice maker support assembly inside the fridge near the ceiling. It should have four screw locations that hold it into place.
Step 3: Using a Phillips head screwdriver, unscrew all four screws and remove the existing ice maker support assembly.
Step 4: Take out the new DA97-05037D Samsung Refrigerator Ice Maker Support Assembly, and insert it into the opening.
Step 5: Reattach the screws that were removed previously and make sure they are fastened securely.
Step 6: Plug the Samsung fridge back into the power source.
Step 7: Test the ice maker to ensure that it is functioning properly.
Congratulations! You have successfully replaced the DA97-05037D Samsung Refrigerator Ice Maker Support Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your Samsung refrigerator’s ice maker support assembly is a relatively simple process that can be done in a few steps. Follow this DIY guide to get your ice maker running again and enjoy icy cold drinks at home.
Materials Needed:
-Phillips head screwdriver
-DA97-05037D Samsung Refrigerator Ice Maker Support Assembly
Step 1: Unplug the Samsung fridge from power source. Of course, safety first!
Step 2: Locate the ice maker support assembly inside the fridge near the ceiling. It should have four screw locations that hold it into place.
Step 3: Using a Phillips head screwdriver, unscrew all four screws and remove the existing ice maker support assembly.
Step 4: Take out the new DA97-05037D Samsung Refrigerator Ice Maker Support Assembly, and insert it into the opening.
Step 5: Reattach the screws that were removed previously and make sure they are fastened securely.
Step 6: Plug the Samsung fridge back into the power source.
Step 7: Test the ice maker to ensure that it is functioning properly.
Congratulations! You have successfully replaced the DA97-05037D Samsung Refrigerator Ice Maker Support Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
