Refrigerator Parts

The Refrigerator Ice Maker Assembly is a replacement for your refrigerator's ice maker. The ice maker receives water from the water inlet valve and then holds the water in the ... ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage is full. If your ice maker isn't working as expected, replacing this part may alleviate the issue. Note that you will need to re-use the auger arm, cover and bracket from your existing ice maker to properly install the new assembly. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: If your old water line has a kink or starts to leak, it should be replaced. A water filter can also be added inline with the copper supply line to improve the quality of your ice.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Ice Maker Assembly• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM item made by Bosch

This Refrigerator Water Inlet Valve supplies water to the ice maker and water dispenser in your refrigerator. If the valve no longer allows water to enter the ice maker or the ... dispenser, replacing this part may alleviate the issue. Safely store any food that could deteriorate while the power is off. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the refrigerator's water supply before you begin. Recommended Item: The Water Filter (item 4378411RB) is designed to improve the taste of drinking water and the clarity of ice cubes by reducing contaminants such as lead and chlorine. Push-in fittings can be used in both copper or plastic 1/4" water lines. Replace filter every 6 months for optimal performance.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM item made by Bosch

Bosch 00744441 OEM Refrigerator Ice Maker Kit. Ice maker assembly includes the wire harness. Please check part compatability by model number before purchasing.

This Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator in the freezer. The thermostat turns off the defrost heater in case it gets too warm in ...the freezer section. If your refrigerator does not defrost, replacing the thermostat may alleviate this issue. To access the part, open the freezer door and remove the shelves, mounting brackets (if they release), and the ice bucket. After you remove the back panel, the defrost thermostat is mounted to the end of the evaporator. Replacing the element will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Defrost Thermostat• Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less