3911EZ9131X LG Dryer Side Venting Kit Stainless Steel

DIY: Replacing a 3911EZ9131X LG Dryer Side Venting Kit - Stainless Steel

1. Gather the tools and replacement parts you will need, including: a Phillips head screwdriver, pliers, an adjustable wrench, a vent kit that is compatible with your LG dryer model, replacement screws, and Allen wrench.

2. Unplug the power cord from the wall outlet.

3. Open the top of the dryer and locate the existing venting kit.

4. Disconnect the venting kit by using the adjustable wrench to remove the clamps that secure the venting hose. Then, unscrew the screws that attach the venting kit to the back of the wall.

5. Remove the old venting kit and discard it.

6. Inspect the wall/floor area where the venting kit was previously installed and clean any debris or dust before installing the new venting kit.

7. Position the new venting kit in the same location as the old one and secure it to the back of the dryer wall with the included screws.

8. Reattach the vent hose to the new venting kit by using the adjustable wrench. Secure the clamps to ensure the vent hose doesn’t come loose.

9. Plug the power cord back into the wall outlet and test your dryer to make sure it is working properly.

10. Congratulations – you have successfully replaced the 3911EZ9131X LG Dryer Side Venting Kit - Stainless Steel!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.