Oven Parts

This Gas Range Igniter ignites the gas for the oven burner. It's wired in series with the safety gas valve for the oven. The safety gas valve won't open unless it detects that ... the igniter is hot enough to light the burner gas. If your range won't turn on, there's little to no heat when baking, or the igniter glows and won't light, replacing it may alleviate these issues. When installing the part, make sure not to touch the new carbide electrode - oil from your fingers may damage the part. Installing this part will require specialized tools, complicated disassembly of the oven and prior repair experience. We strongly recommend that you hire a qualified technician to safely install this part. Replacing this part will require advanced mechanical training. Specialized tools, complex testing and appliance calibration may be required.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Igniter• Tools Needed: Specialized Tools Read More Read Less

This Range Element Control Switch turns the surface element on and off and controls how much heat the element produces. If your element remains at high heat or doesn’t turn ...on at all, replacing this part may alleviate these issues. To access the part, you'll need to remove the back panel of the range. Depending upon your model, you may not have the same terminal blocks and you may need to swap out your wires one at a time. This switch is for 6-inch burners (5.2- 6.6 amp). For 8" burners, use part WP3149400 at whirlpoolparts.com under item number 2786. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Element Control Switch• Tools Needed: Multi screwdriver Read More Read Less

This Gas Oven Vertical Igniter Kit is also referred to as a glow bar. You may need this part if the element itself shorted out, or if the igniter of your oven glows for more t ...han 90 seconds without lighting the gas flame – this may indicate that the igniter is too weak to properly open the valve to allow the gas to feed through. The igniter must glow white hot to properly light the oven; if it glows red or orange replacing it may alleviate these issues. To access the part, pull the oven door off its hinges to remove it, and remove the racks from the oven. The remove the screws holding the bottom panel of the oven in. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also turn off the gas supply that's connected to your oven.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Oven Vertical Igniter Kit• Tools Needed: 1/4" nut driver and 5/16" nut driver Read More Read Less

This Range Sealed Gas Burner Head Assembly directs your oven's gas to the burner head. If the ceramic is cracked on your range or if the burner no longer ignites, replacing th ...is part may alleviate these issues. To install the new part, remove the old burner assembly by turning it counter clockwise by hand. If you are unable to loosen the old burner by hand, using a strap wrench may help. When you remove the ground and the spark wires from the old burner head, make sure they don't fall back into the range top. Turn the new burner head clockwise to lock when replacing. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the gas supply that's connected to your range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Sealed Gas Burner Assembly• No tools required for installation Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Range Bake Burner Assembly keeps your oven heating properly. To access and remove the old oven burner assembly, take out the oven racks, bottom oven panel and flame spread ...er. Make sure, when disconnecting the wires from the old assembly, not to let them fall back into the oven wall. The igniter for this model is included and is not sold separately. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also be sure to shut off the oven's gas supply.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Bake Burner Assembly• Tools Needed: Multi screwdriver Read More Read Less

Maintain the functionality and safety of your oven with this high-quality replacement door glass, designed specifically for Whirlpool and compatible brands. This durable compo ...nent fits seamlessly into a variety of models, including those from Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. Constructed to withstand high temperatures, this replacement part ensures optimal performance while maintaining energy efficiency. Easy to install, it allows you to restore your oven's appearance and make cooking more enjoyable. Ideal for DIY enthusiasts and professional repair technicians alike, this door glass is essential for a fully operational oven. Trust in a reliable solution to keep your kitchen running smoothly and efficiently. Make the switch today for unparalleled quality and peace of mind. Read More Read Less

The Electric Range Coil Surface Element is a 5-turn, 8" D, 2600-W plug-in style heating element. If the surface burner of your appliance no longer heats up, you may be able to ... alleviate the issue by replacing this part. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Recommended Items: If the element's terminals are corroded, you can replace them with the Element Receptacle and Wire Kit (item 330031). If more than one of your appliance’s elements are no longer working, consider purchasing the complete Coil Surface Element Kit (item 4392061). If needed, the matching 6" element (item WP660532) is also sold separately. If the stainless-steel Burner Drip Bowls of your appliance are discolored or dented, you can replace them with item W10278125.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Coil Surface Element• Tools Needed: Multi screwdriver Read More Read Less

This Range Surface Element Kit includes everything you need to replace the coils on your electric range. Kit includes (2) 8" elements, (2) 6" elements, (4) receptacles and rel ...ated hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance. This is an accessory that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools, some disassembly of the range and novice repair experience.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Range Surface Element Kit• Tools Needed: Multi screwdriver Read More Read Less