EBG61108905 LG Temperature Sensor Assembly Thermistor
EBG61108905 LG Thermistor Temperature Sensor Assembly
Weight : 0.18 lbs
Package Dimension : 8.25 x 10.85 x 0.40
EBG61108905 LG Thermistor Temperature Sensor Assembly
Weight : 0.18 lbs
Package Dimension : 8.25 x 10.85 x 0.40
Please Verify Your Purchase to Submit a Review
Replacing the EBG61108905 LG Thermistor Temperature Sensor Assembly:
1. Start by shutting off power to the appliance by unplugging it or turning the circuit breaker off.
2. Carefully open the appliance to get access to the EBG61108905 LG thermistor temperature sensor assembly.
3. Using a small screwdriver, remove the screws from the back of the thermistor retaining clip.
4. Disconnect the connector from the thermistor.
5. To install the new thermistor, put the thermistor into the retaining clip and secure with the screws.
6. Reconnect the connector to the thermistor assembly.
7. Reassemble the appliance and restore power.
8. Test the new thermistor temperature sensor assembly to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by shutting off power to the appliance by unplugging it or turning the circuit breaker off.
2. Carefully open the appliance to get access to the EBG61108905 LG thermistor temperature sensor assembly.
3. Using a small screwdriver, remove the screws from the back of the thermistor retaining clip.
4. Disconnect the connector from the thermistor.
5. To install the new thermistor, put the thermistor into the retaining clip and secure with the screws.
6. Reconnect the connector to the thermistor assembly.
7. Reassemble the appliance and restore power.
8. Test the new thermistor temperature sensor assembly to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
