AJK72989704 LG Washer Suspension Assembly

1. Preparing for Installation: Before beginning the process of replacing your LG Washer Suspension Assembly (AJK72989704), it is important to have the replacement parts and tools ready. You will need the new suspension assembly, a Phillips head screwdriver, and a pair of pliers.

2. Removing the Old Suspension Assembly: Begin by unplugging the washer from the power source. Next, locate the two screws on the back of the washer where the suspension assembly is connected. Use the Phillips head screwdriver to remove the screws and then slide the old suspension assembly out.

3. Installing the New Suspension Assembly: Locate the holes in the back of the washer where the suspension assembly will attach. Place the new suspension assembly into the holes and then use the Phillips head screwdriver to re-attach the screws.

4. Completing the Process: Once the screws are tight, plug the washer back into the power source and turn it on. You will need to check the operation of the new suspension assembly to make sure that it is working properly. If all is working correctly, the new suspension assembly is now operational and you have successfully replaced it.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.