AEQ72909602 LG Refrigerator Ice Maker Kit Assembly
Refrigerator ice maker kit assembly for some models of LG fridges.
Weight : 5.1223 lbs
Dimension : 13.0708 x 3.622 x 15.0393
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Refrigerator ice maker kit assembly for some models of LG fridges.
Weight : 5.1223 lbs
Dimension : 13.0708 x 3.622 x 15.0393
Write Your Own Review
The following parts are replaced by this product
- AEQ72909601
DIY Guide to Replacing an LG Refrigerator ICEMAKER ASSEMBLY KIT AEQ72909602
Replacing the icemaker assembly kit in your LG refrigerator model AEQ72909602 is a relatively simple process that can be done in minimal time with the help of this DIY guide. With a few basic tools and some patience, you can easily replace the icemaker assembly kit yourself without having to call a repairman.
Things You Will Need:
• Phillips-head screwdriver
• Flat-head screwdriver
• Replacement icemaker assembly kit (AEQ72909602)
• Towel
Step 1: Unplug the refrigerator from the power source and remove any food from the freezer compartment. Place a towel on the floor beneath the refrigerator to catch any loose parts or water that may fall during the installation.
Step 2: Locate the ice maker assembly inside the upper left corner of the freezer compartment. Remove the Phillips-head screws securing the unit in place.
Step 3: Gently pull the assembly out away from the wall and disconnect the electrical wiring connected to the back of the unit.
Step 4: Remove the flat-head screws located on the back of the assembly and carefully separate the plastic parts that make up the assembly.
Step 5: Take the new icemaker assembly kit (AEQ72909602) and connect the wiring to the back of the assembly.
Step 6: Place the plastic components of the new icemaker assembly kit together and secure with the flat-head screws.
Step 7: Gently slide the new icemaker assembly back into place and secure with the Phillips-head screws.
Step 8: Plug the refrigerator back into the power source and test the icemaker to ensure it’s functioning properly.
Congratulations, you have successfully replaced the icemaker assembly kit in your LG refrigerator model AEQ72909602!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the icemaker assembly kit in your LG refrigerator model AEQ72909602 is a relatively simple process that can be done in minimal time with the help of this DIY guide. With a few basic tools and some patience, you can easily replace the icemaker assembly kit yourself without having to call a repairman.
Things You Will Need:
• Phillips-head screwdriver
• Flat-head screwdriver
• Replacement icemaker assembly kit (AEQ72909602)
• Towel
Step 1: Unplug the refrigerator from the power source and remove any food from the freezer compartment. Place a towel on the floor beneath the refrigerator to catch any loose parts or water that may fall during the installation.
Step 2: Locate the ice maker assembly inside the upper left corner of the freezer compartment. Remove the Phillips-head screws securing the unit in place.
Step 3: Gently pull the assembly out away from the wall and disconnect the electrical wiring connected to the back of the unit.
Step 4: Remove the flat-head screws located on the back of the assembly and carefully separate the plastic parts that make up the assembly.
Step 5: Take the new icemaker assembly kit (AEQ72909602) and connect the wiring to the back of the assembly.
Step 6: Place the plastic components of the new icemaker assembly kit together and secure with the flat-head screws.
Step 7: Gently slide the new icemaker assembly back into place and secure with the Phillips-head screws.
Step 8: Plug the refrigerator back into the power source and test the icemaker to ensure it’s functioning properly.
Congratulations, you have successfully replaced the icemaker assembly kit in your LG refrigerator model AEQ72909602!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
