AEM73213001 LG Washer Tub To Pump Drain Hose Assembly
Part #: LGE AEM73213001
LG Electronics Sears Kenmore Clothes Washer Washing Machine TUB TO PUMP DRAIN HOSE ASSEMBLY AEM73213001
Weight : 0.225 lbs
Dimension : 7.1259 x 2.3228 x 1.8897
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
LG Electronics Sears Kenmore Clothes Washer Washing Machine TUB TO PUMP DRAIN HOSE ASSEMBLY AEM73213001
Weight : 0.225 lbs
Dimension : 7.1259 x 2.3228 x 1.8897
Write Your Own Review
The following parts are replaced by this product
- AEM73652901
Replacing the AEM73213001 LG Washer Tub to Pump Drain Hose Assembly
Are you looking to replace the AEM73213001 LG Washer Tub to Pump Drain Hose Assembly? If so, it’s an easy do-it-yourself (DIY) project that should take approximately 30 minutes of your time. Follow these simple steps to quickly and easily complete this replacement.
Materials Needed:
•AEM73213001 LG Washer Tub to Pump Drain Hose Assembly
•Screwdriver
•Adjustable wrench
Directions:
1. Unplug the washer from the electrical outlet.
2. Remove the two screws securing the back panel to the washer with a screwdriver.
3. Lift the back panel off and set aside.
4. Locate the old hose and remove it from the pump by using an adjustable wrench.
5. Remove the new hose from the package and attach it to the pump in place of the original hose.
6. Replace the back panel and secure it with the two screws.
7. Plug the washer back into the electrical outlet.
Your AEM73213001 LG Washer Tub to Pump Drain Hose Assembly has now been successfully replaced. Enjoy your fresh start!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the AEM73213001 LG Washer Tub to Pump Drain Hose Assembly? If so, it’s an easy do-it-yourself (DIY) project that should take approximately 30 minutes of your time. Follow these simple steps to quickly and easily complete this replacement.
Materials Needed:
•AEM73213001 LG Washer Tub to Pump Drain Hose Assembly
•Screwdriver
•Adjustable wrench
Directions:
1. Unplug the washer from the electrical outlet.
2. Remove the two screws securing the back panel to the washer with a screwdriver.
3. Lift the back panel off and set aside.
4. Locate the old hose and remove it from the pump by using an adjustable wrench.
5. Remove the new hose from the package and attach it to the pump in place of the original hose.
6. Replace the back panel and secure it with the two screws.
7. Plug the washer back into the electrical outlet.
Your AEM73213001 LG Washer Tub to Pump Drain Hose Assembly has now been successfully replaced. Enjoy your fresh start!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.